CBQDL - INK PRINTING NOI (FOR CANON CANORAMA PRINTER 370/370-4/380)
- MSDS: CBQDL
- Manufacturer: HILORD CHEMICAL CORP
- Product Name: INK PRINTING NOI (FOR CANON CANORAMA PRINTER 370/370-4/380)
- National Stock Number: 6750-00-165-7133
Product Identification
Product ID:INK PRINTING NOI (FOR CANON CANORAMA PRINTER 370/370-4/380)
MSDS Date:02/03/1992
FSC:6750
NIIN:00-165-7133
Kit Part:Y
MSDS Number: CBQDL
Responsible Party
HAUPPAUGE, NY 11788-4004
US
Emergency Phone: 516-234-7373
Info Phone: 516-234-7373
Cage: 1EV20
Contractor
Telephone: 516-234-7373
Cage: 1EV20
Ingredients
MINERAL SPIRITS (ISOPAR IS A TRADEMARK/BRAND NAME OF
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: >99%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE CONTACT: SLIGHTLY IRRITATING BUT
DOES NOT INJURE EYE TISSUE. SKIN CONTACT: LOW ORDER OF TOXICITY.
FREQUENT OR PROLONGED CONTACT MAY IRRITATE AND CAUSE DERMATITIS.
INHALATION: HIGH VAPOR/AEROSOL CO NCENTRATIONS (GREATER THAN
APPROX. 1000PPM) ARE IRRITATING TO EYES, CAUSE HEADACHES.
INGESTION: MINIMAL TOXICITY.
Effects of Overexposure:IRRITATING TO THE EYES AND THE RESPIRATORY
TRACT. MAY CAUSE HEADACHES, DIZZINESS, ANESTHESIA, DROWSINESS,
UNCONSCIOUSNESS, AND OTHER CENTRAL NREVOUS SYSTEM EFFECTS,
INCLUDING DEATH.
Medical Cond Aggravated by Exposure:SKIN CONTACT MAY AGGRAVATE AN
EXISTING DERMATITIS CONDITION.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER UNTIL IRRITATION
SUBSIDES. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION. SKIN:
FLUSH WITH LARGE AMOUNTS OF WATER. USE SOAP IF AVAILABLE. REMOVE
CONTAMINATED CL OTHING AND SHOES. LAUNDER. INHALATION: IMMEDIATELY
REMOVE THE AFFECTED VICTIM FROM EXPOSURE. CALL FOR PROMPT MEDICAL
ATTENTION. INGESTION: DO NOT INDUCE VOMITING. GET PROMPT MEDICAL
ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:100F,38C
Autoignition Temp:Autoignition Temp Text:559F
Lower Limits:0.6%
Upper Limits:7.0%
Extinguishing Media:WATER SPRAY, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:USE AIR-SUPPLIED BREATHING EQUIPMENT FOR
ENCLOSED AREAS. COOL EXPOSED CONTAINERS WITH WATER SPRAY. AVOID
BREATHING VAPORS.
Unusual Fire/Explosion Hazard:STATIC DISCHARGE: MATERIAL CAN ACCUMULATE
STATIC CHARGES WHICH CAN CAUSE AN INCENDIARY ELECTRICAL DISCHARGE.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. PREVENT LIQUID FROM
ENTERING SEWERS, WATERCOURSES, OR LOW AREAS. CONTAIN SPILLED LIQUID
WITH SAND OR EARTH. DO NOT USE COMBUSTIBLE MATERIALS SUCH AS
SAWDUST. RECOVER BY PUMPIN G (USE AND EXPLOSION PROOF OR HAND
PUMP).
Handling
Handling and Storage Precautions:ELECTROSTATIC ACCUMULATION HAZARD. USE
PROPER GROUNDING PROCEDURES. STORE AT AMBIENT TEMPERATURE.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. REMOVE
CONTAMINATED CLOTHES. WASH SKIN WITH SOAP AND WATER AFTER CONTACT.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORS MAY BE NECESSARY
TO PREVENT OVEREXPOSURE BY INHALATION.
Ventilation:MECHANICAL DILUTION VENTILATION IS RECOMMENDED WHENEVER
THIS PRODUCT IS USED IN A CONFINED SPACE. (EXPLOSION-PROOF)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:LONG SLEEVES SHIRT
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
KEY1:F4
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:309F,154C
Vapor Pres:<10 MMHG
Vapor Density:5.14
Spec Gravity:0.75-0.82
Evaporation Rate & Reference:0.4 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK LIQUID. FAINT ISOPARAFFINIC HYDROCARBON ODOR.
Percent Volatiles by Volume:UNKNON
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND OPEN FLAME.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:CONSULT A EXPERT ON DISPOSAL OF RECOVERED
MATERIAL AND ENSURE CONFORMITY TO LOCAL DISPOSAL REGULATIONS.
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.